For a long time connecting your TV or other external monitors to your laptop has always been a hassle with cables and drivers. Your TV had an HDMI-port, but your laptop only DVI, your projector requires VGA and your MacBook can only do DP. Once you got a matching adapter, you noticed that the cable is far to short for you to sit comfortably on your couch. Fortunately, we’re about to put an end to this. At least, that was my impression when I first heard of Miracast.
Miracast is a certification program of the Wifi-Alliance based on their Wifi-Display specification. It defines a protocol to connect external monitors via wifi to your device. A rough description would be “HDMI over Wifi” and in fact the setup is modeled closely to the HDMI standard. Unlike existing video/audio-streaming protocols, Miracast was explicitly designed for this use-case and serves it very well. When I first heard of it about one year ago, I was quite amazed that it took us until late 2012 to come up with such a simple idea. And it didn’t take me long until I started looking into it.
For 4 months now I have been hacking on wifi, gstreamer and the kernel to get a working prototype. Despite many setbacks, I didn’t loose my fascination for this technology. I did complain a lot about the hundreds of kernel dead-locks, panics and crashes during development and the never-ending list of broken wifi-devices. However, to be fair I got the same amount of crashes and bugs on Android and competing proprietary Miracast products. I found a lot of other projects with the same goal, but the majority was closed-source, driver-specific, only a proof-of-concept or limited to sink-side. Nevertheless, I continued pushing code to the OpenWFD repository and registered as speaker for FOSDEM-2014 to present my results. Unfortunately, it took me until 1 week before FOSDEM to get the wifi-P2P link working realiably with an upstream driver. So during these 7 days I hacked up the protocol and streaming part and luckily got a working demo just in time. I never dared pushing that code to the public repository, though (among others it contains my birthday, which is surprisingly page-aligned, as magic mmap offset) and I doubt it will work on any setup but mine..
The first day after FOSDEM I trashed OpenWFD and decided to start all over again writing a properly integrated solution based on my past experience. Remembering the advice of a friend (“Projects with ‘Open’ in their name are just like countries named ‘Democratic Republic of …'”) I also looked for a new name. Given the fact that it requires a miracle to get Wifi-P2P working, it didn’t take me long to come up with something I liked. I hereby proudly announce: MiracleCast
The core of MiracleCast is a daemon called miracled. It runs as system-daemon and manages local links, performs peer-discovery on request and handles protocol encoding and parsing. The daemon is independent of desktop environments or data transports and serves as local authority for all display-streaming protocols. While Miracast will stay the main target, other competing technologies like Chromecast, Airtame and AirPlay can be integrated quite easily.
The miraclectl command-line tool can be used to control the daemon. It can create new connections, modify parameters or destroy them again. It also supports an interactive mode where it displays events from miracled when they arrive, displays incoming connection attempts and allows direct user-input to accept or reject any requests.
miracled and miraclectl communicate via DBus so you can replace the command-line interface with graphical helpers. The main objects on this API are Links and Peers. Links describe local interfaces that are used to communicate with remote devices. This includes wifi-devices, but also virtual links like your local IP-Network. Peers are remote devices that were discovered on a local link. miracled hides the transport-type of each peer so you can use streaming protocols on-top of any available link-type (given the remote side supports the same). Therefore, we’re not limited to Wifi-P2P, but can use Ethernet, Bluetooth, AP-based Wifi and basically any other transport with an IP layer on top. This is especially handy for testing and development.
Local processes can now register Sources or Sinks with miracled. These describe capabilities that are advertised on the available links. Remote devices can then initiate a connection to your sink or, if you’re a source, you can connect to a remote sink. miracled implements the transmission protocol and hides it behind a DBus interface. It routes traffic from remote devices to the correct local process and vice versa. Regardless of whether the connection uses Miracast, Chromecast or plain RTSP, the same API is used.
The main target still is Miracast! While all the APIs are independent of the protocol and transport layer, I want to get Miracast working as it is a nice way to test interoperability with Android. And for Miracast, we first need Wifi-P2P working. Therefore, that’s what I started with. The current miracled daemon implements a fully working Wifi-P2P user-space based on wpa_supplicant. Everyone interested is welcome to give it a try!
Everything on top, including the actual video-streaming is highly experimental and still hacked on. But if you hacked on Miracast, you know that the link-layer is the hard part. So after 1 week of vacation (that is, 1 week hacking on systemd!) I will return to MiracleCast and tackle local sinks.
As I have a lot more information than I could possible summarize here, I will try to keep some dummy-documentation on the wiki until I the first project release. Please feel free to contact me if you have any questions. Check out the git-repository if you want to see how it works! Note that MiracleCast is focused on proper desktop integration instead of fast prototyping, so please bear with me if API design takes some time. I’d really appreciate help on making Wifi-P2P work with as many devices as possible before we start spending all our efforts on the upper streaming layers.
During the next weeks, I will post some articles that explain step by step how to get Wifi-P2P working, how you can get some Miracast protoypes working and what competing technologies and implementations are available out there. I hope this way I can spread my fascination for Miracast and provide it to as many people as possible!